軍事模型是一件藝術品，好的軍事模型制作完成后逼真，可供人觀賞，也可用于軍事教學。而模型是如何制作的呢？下面就由小物帶大家一探究竟。

　　A military model is a work of art, and once a good military model is made, it is realistic and can be enjoyed by people, as well as used for military teaching. And how is the model made? Below, Xiaowu will take everyone to explore the truth.

　　工具/原料

　　Tools/raw materials

　　模型一套、模型膠水（田宮和小號手ABS膠水）、筆刀、水口剪鉗、直彎鑷子兩支、九洋切割板、打磨條、砂紙一套銼刀一套、模型手鋸、模型手鉆（鉆頭有0.02至2mm的鉆頭）、模型開模器、打磨塊、牙膏補土、模型AB補土、水補土。

　　A set of models, model glue (Tian Gong and Xiao Shu hand ABS glue), pencil sharpener, water mouth pliers, two straight and curved tweezers, Joyoung cutting plate, polishing strip, sandpaper, a set of files, model hand saw, model hand drill (with drill bits ranging from 0.02 to 2mm), model opener, polishing block, toothpaste soil filling, model AB soil filling, water soil filling.

　　如果模型設計不合理想要改進或者增加金屬細節我們可以用到PE（銅制蝕刻片）ABS塑料膠板、銅線。

　　If the model design is unreasonable and we want to improve or add metal details, we can use PE (copper etching sheet), ABS plastic sheet, and copper wire.

　　上色工具有面相筆、平頭畫筆和噴筆噴泵、遮蓋帶。

　　Coloring tools include face brushes, flat head brushes, spray nozzles, and masking tapes.

　　舊化裝備有舊化土、漬洗液，也可用丙烯顏料加打火機油做漬洗。

　　Old equipment includes old soil and cleaning solution, and can also be cleaned with acrylic paint and spark oil.

　　小物的基礎工具

　　Basic tools for small things

　　制作時的場景

　　Scene during production

　　方法/步驟

　　Method/Steps

　　首先我們說組裝，按照說明書的編號指示，找到相應編號的零件板件，按照英文字母的數字編號，使用水口剪鉗剪下零件將水口用筆刀削整，砂紙打磨平整后，涂上模型膠水，與另一個零件相粘，并用手壓緊十秒鐘左右就可以了，兩個零件之間對合留一條小縫，用綠蓋膠水刷上一點即可膠水順著縫隙流滿后用手壓緊使膠水溢出，待完全干后用砂紙打磨平整即可，此方法不是一次就行需要多次點膠，如果零件契合不好溜縫膠水無法彌補住縫隙時我們就要用到牙膏補土了，將牙膏補土擠出涂在縫隙上，使用一次性探牙針或筆刀進行填縫，待干后使用砂紙打磨平整即可。

　　Firstly, let's talk about assembly. According to the numbering instructions in the manual, find the corresponding part board and number it according to the English letters. Use a water nozzle pliers to cut off the part and use a pen knife to trim the water nozzle. After sanding it flat, apply model glue and stick it to another part. Press it down by hand for about ten seconds. Leave a small gap between the two parts and brush it with green cap glue. The glue will flow through the gap and then press it down by hand to make it overflow. After it is completely dry, use sandpaper to polish it flat. This method is not enough and requires multiple dispensing. If the parts do not fit well and the glue cannot fill the gap, we need to use toothpaste to fill the soil. Apply toothpaste to fill the gaps and squeeze out the soil, then use a disposable probing needle or pen knife to fill the gaps, After drying, use sandpaper to smooth it out.

　　上色

　　Coloring

　　下面我們說到上色，上色是模型三步走的（組裝上色舊化）第二步，我們首先要知道，上色是手繪還是噴泵噴涂，無論手繪還是噴涂在上色之前都需打上一遍水補土，目前水補土有兩個牌子一個郡士一個田宮軍事的有1000目和2000目德用和田宮的水補土兩者都是噴罐，水補土可以視為底漆，也可視為模型最后的補縫劑，上色時也可以似的模型漆的附著能力更好，也可以判斷模型的迷彩涂裝是否均勻，使用之前首先上下?lián)u晃均勻。

　　Next, let's talk about coloring. Coloring is the second step of the three-step process for the model (assembly, coloring, and aging). Firstly, we need to know whether coloring is done by hand drawing or spray painting. Whether by hand drawing or spray painting, a layer of water putty needs to be applied before coloring. Currently, there are two brands of water putty: one from Junshi and the other from Tiangong Military, with 1000 mesh and 2000 mesh respectively. The water putty from Deyong and Tiangong can be used as a primer or as the final joint filler for the model. When coloring, it can also improve the adhesion of the model paint and determine whether the camouflage coating of the model is uniform. Before use, shake it up and down evenly.

　　本文由 大型軍事模型 友情奉獻.更多有關的知識請點擊  http://www.masters-athlete.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from a large military model For more related knowledge, please click http://www.masters-athlete.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.